Back to Products
K-Seal

K5501 - K-SEAL COOLANT LEAK REPAIR 236ML

List price
NZ$45.00
NZ$38.50
Automotive/Transport cooling system repair. K-Seal will repair most coolant system leaks in an engine block, head, radiator & heater matrix.
- Optional

PERMANENT COOLANT LEAK REPAIR WITH A UNIQUE CERAMIC FORMULA

Repairs most coolant system leaks in the block, head, radiator & heater matrix Mixes with all types of Antifreeze & Coolant Save time and Money Avoid time consuming and expensive mechanical repairs that could cost you hundreds of dollars K-Seal is simple to use: No need to flush cooling system unless contaminated with oil, sludge etc. Shake bottle (at least 30 seconds) to ensure the contents are evenly mixed. Add entire contents to radiator or overflow tank. ...and your done How does K-Seal work? When there is a crack or hole in the cooling system K-Seal finds the low-pressure area and deposits the special ceramic micro-fibre and copper formulation as it flows through the damaged area. Within seconds the crack or hole is completely filled with ceramic micro-fibres and copper and the repair has been made. This seal is further enhanced by heat to form a repair that will last the life of the engine. K-Seal is specially formulated to permanently seal cracks in the engine block and head. This unique product is guaranteed to mix with all types of glycol based coolant and antifreeze. K-Seal can be used to seal holes and cracks in the head gasket, radiator, heater core, core plugs, water pump casing and other metal components of the cooling system in both petrol and diesel engines. One 236ml bottle of K-Seal will treat cooling systems up to 20 litres in capacity. K-Seal will NOT repair holes or cracks greater than 0.75mm wide. Dont waste money on quick fix Old Technology Products

Features

  • Simple to use. Just shake, pour and go
  • Mixes with all antifreeze and coolants.
  • No need to drain or flush the system.
  • It repairs leaks and cracks in the radiator, head gasket, heater core, freeze plugs, water pump casing, cylinder heads and engine blocks.
  • 236ml Bottle
  • Treat up to 20L capacity cooling systems

FAQs
Is K-Seal compatible with all types of coolant?
Yes. K-Seal does not react with coolant or other additives that may already be present in the system.

Is there any special preparation I need to do before using K-Seal?
Unlike other block sealers, K-Seal is a simple ‘pour & go’ solution. Shake the bottle well and then add the entire contents to the cooling system where you would normally top up the coolant/water.

How much K-Seal do I need?
1 standard bottle of K-Seal (236ml/8floz) will treat cooling systems with a capacity up to 20 litres (this covers motorbikes up to light commercial vehicles). For larger cooling systems use our Heavy Duty (472ml/16floz) size K-Seal.

Overall Rating

There are currently no reviews for this product.